Pipefitting involves the installation, assembly, and maintenance of piping systems. Several techniques are used in pipefitting to ensure accurate and secure connections. Here are some of the common techniques used in pipefitting:

Pipe cutting: Pipes need to be cut to specific lengths during installation. Various tools are used for cutting pipes, such as hacksaws, reciprocating saws, or pipe cutters. Care must be taken to make clean, square cuts to ensure proper alignment and fit.

Pipe threading: Threading is the process of cutting threads onto the ends of pipes to allow them to be joined using threaded fittings. This technique is commonly used for smallersized pipes. Pipe threading machines or handheld pipe dies are used to create the threads.

Pipe welding: Welding is used to permanently join pipes together. Different welding techniques, such as shielded metal arc welding (SMAW), gas tungsten arc welding (GTAW), or gas metal arc welding (GMAW), may be employed depending on the project requirements and materials involved.

Pipe brazing and soldering: Brazing and soldering techniques are used to join pipes and fittings made of materials like copper or brass. In brazing, a filler metal with a lower melting point than the base metal is used, while soldering uses a lower melting point alloy. Heat and flux are applied to create a strong bond between the components.

Pipe grooving: Grooving is a technique used for joining pipes with groovedend fittings. Specialized tools are used to create grooves on the pipe ends, allowing them to be connected using grooved fittings. This method is commonly used in fire protection systems and largediameter piping.

Pipe flanging: Flanging involves creating a raised edge or lip on the end of a pipe to facilitate connection with flanged fittings. Flanged connections are widely used in industrial applications where highpressure or hightemperature systems require secure joints.

Pipe bending: Pipe bending techniques are used to change the direction or shape of pipes to fit specific layouts or avoid obstacles. Methods like heat bending, cold bending, or using specialized pipe bending machines are employed to achieve the desired pipe shape without damaging the material.

Pipe support and hanger installation: Proper installation of pipe supports and hangers is crucial to ensure the stability and integrity of the piping system. Techniques for mounting supports, clamps, and hangers are employed to secure pipes at appropriate intervals and prevent sagging or excessive movement.
Each technique requires specific tools, equipment, and skills, and the choice of technique depends on factors such as pipe material, system requirements, and project specifications. Experienced pipefitters utilize a combination of these techniques to ensure accurate, efficient, and safe pipe installations.
In pipefitting, several mathematical formulas are commonly used to calculate measurements, angles, and dimensions for proper pipe installation. Here are some of the important formulas used in pipefitting:

Pipe circumference: The circumference of a pipe can be calculated using the formula C = π × d, where C is the circumference and d is the diameter of the pipe. This formula is helpful for determining the length of pipe needed for specific installations or for calculating material requirements.

Pipe volume: The volume of a pipe can be calculated using the formula V = π × r² × L, where V is the volume, r is the radius of the pipe, and L is the length of the pipe. This formula is useful for determining the capacity of a pipe or for calculating the amount of fluid it can hold.

Pipe weight: The weight of a pipe can be calculated using the formula W = ρ × V, where W is the weight, ρ is the density of the material, and V is the volume of the pipe. This formula is used to estimate the weight of pipe sections for handling and installation purposes.

Friction loss: The DarcyWeisbach equation is often used to calculate friction loss in pipe systems. It considers factors such as pipe length, diameter, fluid velocity, and the roughness of the pipe's interior surface. This formula helps determine the pressure drop along the pipe and is critical for sizing pumps and determining flow rates.

Pipe angles and offsets: Pipefitting often requires determining angles and offsets for proper pipe alignment. Trigonometric formulas such as the Pythagorean theorem, sine, cosine, and tangent functions are used to calculate these angles and offsets accurately.

Pipe cutbacks: When fitting two pipes together at an angle, cutbacks are required to ensure proper alignment. Trigonometric formulas are used to calculate the correct lengths and angles for these cutbacks.
It's important to note that pipefitting calculations may also involve considerations for thermal expansion, pressure ratings, flow rates, and pipe support spacing, among other factors. Utilizing these mathematical formulas and understanding their application in pipefitting can help ensure accurate measurements, efficient installations, and safe pipe systems.